Micropore filters centrifuge filter filter making machine
Perfume Freezing Filter Profile:
The product is a latest product developed by our company specially used for clarification and filtration of liquid such as cosmetics and perfume etc. After freezing , it is an ideal device for filtering cosmetics and perfume in coametics factories. The product is made of high quality 304 stainless steel or 316L stainless steel. The pneumatic diaphragm impoeted from USA is adopted for pressure sourse to carry out positive pressure filtration.
The connecting pipes are sanitary polishing pipes, which completrly adopt rapid installation type connection form, with convenient assembly, disassembly and cleaning.
Equipment with polypropylene microporous filtration film, it can be widely used in cosmetics industry, scientific research department, hospital and laboratory etc. for clarification , becteria removal and foltration of small amount of liquid , or micro chemical analysis , which is convenient and reliable.
Technical :
1 |
Frozen pot |
1, loading volume: 200L full volume: 240L; inner material SUS316L thickness 3mm, outer material SUS304 thickness 2mm, the outer layer of polyurethane foam insulation
2, cooling: titanium coil pot installation (TA2 material)
3, spout: Stainless steel quick inch butterfly valve
4, pneumatic stirrer
5, equipped with a silencer |
2 |
Refrigeration units |
1, Power: 5HP
2, the minimum cooling temperature: 5 ºC
3, fully enclosed ultra-low temperature compressor;
4, with a temperature control system
5, the expansion valve TX2 |
3 |
Bracket, control cabinets, piping |
1, all material is SUS304
2, sanitary butterfly valve pipe quick and easy cleaning
3, the bracket with movable casters |
4 |
Precision filter pore |
SUS304 porous filter 2set , it was installed a device 0.22μm polypropylene folded filter core (20 inches) and a folding device 1μm polypropylene filter core (20 inches) |
5 |
Plate and frame filter |
1, made of SUS316L; frame used 1Cr18Ni9Ti quality corrosion resistant stainless steel
2, the filter layer: 10 layers
3, the filtration pressure: 0.25Mpa; flow 1.2T / H
4, the diaphragm: Mixed cellulose ester microporous membrane, pore size 0.1 ~ 2μm, filter diameter 150mm; Number 10 |
6 |
Pneumatic diaphragm pump |
Flow :340L/MIN
Caliber:3/4″
Free send oil water separator and trachea |
7 |
Control |
1,Temperature controller EW-181; resolution of ± 1; control range: -45 ºC ~ 80 ºC
2,Compressor is turned on and off; diaphragm pump opening and closing, refrigeration units alarm, emergency stop control
3,free have 4 set pressure gauge |
8 |
1, from room temperature down to 5 ºC with about 90 to 120 minutes
2, at 30 minutes 200L filtration rate (determined in accordance with the perfume formulation) |
Related Products
Our Services
Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer.
Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there untill get your agreement.
Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons.
Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.
Certificate services: we can provide related certificates to customers freely according to the request of customers.
Inspection services: you can ask the third part inspection company or your inspector to inspect the products before shipment.
The file: the Manual Specification, report of the material which used to the equipment and others documents related to the GMP authentication information will be provided by us.